Priced at $329.99, the Z690I Aorus Ultra Plus is well-priced and generally well equipped for a Mini-ITX board. It looks good, has integrated RGB, and is arguably the best option in the Z690 Mini-ITX space. But if you need more than two SATA ports, you’ll need to look at other options.

New for the summer of 2022, the Z690I Aorus Ultra Plus is a Mini-ITX update of the Aorus Ultra. If you remember, Gigabyte confirmed stability issues on that board when running the PCIe slot at the full PCIe 4.0 bandwidth. So the company issued an exchange/refund program and offered a workaround by lowering the PCIe bandwidth to 3.0 speeds. The old board is now the Aorus Ultra Lite and is limited to PCIe 3.0 x16, while the Z690I Aorus Ultra Plus offers the full PCIe 4.0 x16 bandwidth.

History aside, you’ll find the updated board on Newegg(opens in new tab) and Amazon(opens in new tab) for $329.99, boasting the same hardware as the original/Ultra Lite (which isn’t a bad deal now at $150.99). The Ultra Plus has robust power delivery, including 105A SPS MOSFETs, a premium audio codec, two M.2 sockets (none are PCIe 5.0, sadly), fast networking with integrated Wi-Fi 6E and a 2.5 GbE port. It also looks good and is the only Z690 Mini-ITX board that includes onboard RGB lighting. Hardware-wise, it’s well-equipped and sits on the lower end of the Z690 Mini-ITX price range. making it an attractive option for those looking to build a small PC.

The board’s performance across our test suite was average to above average, with nothing notably slow or fast. Power use and memory bandwidth were spot on, as was its tested performance in games. The good news is that we didn’t notice any instability running default/PCIe 4.0 or capture any WHEA errors in our time with the board. It looks like Gigabyte’s update fixed the issue with the board and locked down the previous version to ensure stability on the existing models.

We’ll look at the board’s full list of features and performance below and determine if it carves out a spot on our best motherboards list. Read on to get all the information you need to make an informed buying decision. Before that, here’s a list of specs, directly from Gigabyte’s website.

Specifications: Gigabyte Z690I Aorus Ultra Plus

Socket LGA1700
Chipset Z690
Form Factor Mini-ITX
Voltage Regulator 13 Phase (10+1+2, 105A SPS MOSFETs for Vcore)
Video Ports (1) HDMI (v2.0)
(1) DisplayPort (v1.4)
USB Ports (1) USB 3.2 Gen 2×2 Type-C (20 Gbps)
(3) USB 3.2 Gen 2 (10 Gbps)
(2) USB 3.2 Gen 1 (5 Gbps)
(2) USB 2.0 (480 Mbps)
Network Jacks (1) 2.5 GbE
Audio Jacks (2) Analog + SPDIF
Legacy Ports/Jacks
Other Ports/Jack
PCIe x16 (1) v5.0 (x16)
PCIe x8
PCIe x4
PCIe x1
DIMM Slots (2) DDR5 6400+(OC), 64GB Capacity
M.2 Sockets (2) PCIe 4.0 x4 (64 Gbps) / PCIe (up to 80mm)
U.2 Ports
SATA Ports (2) SATA3 6 Gbps (Supports RAID 0/1)
USB Headers (1) USB v3.2 Gen 1, Type-C (5 Gbps)
(1) USB v3.2 Gen 1 (5 Gbps)
(1) USB v2.0 (480 Mbps)
Fan/Pump Headers (3) 4-Pin (CPU, Watercooling CPU, System Fan)
RGB Headers (1) aRGB (3-pin)
(1) AURA RGB (4-pin)
Diagnostics Panel
Internal Button/Switch
SATA Controllers
Ethernet Controller(s) Intel I225-V (2.5 Gbps)
Wi-Fi / Bluetooth Intel AX411 Wi-Fi 6E (2×2 ax, MU-MIMO, 2.4/5/6 GHz, 160 MHz, BT 5.2)
USB Controllers
HD Audio Codec Realtek ALC4080
DDL/DTS ✗ / DTS:X Ultra
Warranty 3 Years

Inside the Box of the Gigabyte Z690I Aorus Ultra Plus

Gigagbyte includes several accessories along with the board. The basics are all there, including multiple fan header adapters (a couple of the 4-pin headers are not the standard size), a USB 2.0 header (same as the USB ports, a non-standard header to save on board real estate), SATA cables, and more. Again, my Gigabyte sample did not include a driver disk/USB. If yours arrives without, get the latest drivers from Gigabyte’s site. Here’s a list of the included extras.

  • (2) SATA 6Gb/s cables
  • (3) 4-pin to 4-pin fan adapters
  • RGB extension cable
  • USB extension cable
  • 4-pin to Molex cable
  • Wi-Fi antennas
  • M.2 SSD screw packages
  • User manual

Design of the Z690I Aorus Ultra Plus

Looking at the Z690I Aorus Ultra Plus, we get a good sense of the general styling. Like its larger siblings, the board sports a black PCB with a brushed-aluminum finish on the black heatsinks, along with a gray accent proudly showing off the Aorus falcon[1] . All sockets are reinforced and there’s a backplate that protects the back of the board and (presumably) helps with thermals. Along the right edge of the board is a row of several RGBs that produce a bright glow with saturated colors. Despite its small size, this is a good-looking board to build your Alder Lake-based system around, especially if you’re looking for RGB lighting without having to supply strips or other accessories.

With larger boards, we split the feature discussion into halves. But since there isn’t a distinct top and bottom here, we’ll cover the features moving clockwise around the board. On the left, the VRM heatsink sports the Aorus branding in white, with the board’s name toward the bottom. On top is a required 8-pin EPS to power the CPU, while next to it is one of four fan headers (one of two full-size 4-pin headers). The heatsinks seem to have plenty of mass and surface area to keep the beefy power delivery below easily running within spec.

Moving right, past the top VRM bank, we run into two more 4-pin fan headers. However, these are smaller and proprietary, to save space. So they require the included 4-pin to 4-pin adapters to fit standard fan connectors. Each header supports PWM and DC fans, with output up to 2A/24W. And they are controlled through the BIOS. Unless you have some massive pump or industrial fans, the output here should be plenty to support air or water cooling configurations.

Power delivery on our little Aorus Ultra Plus is one of the more robust we’ve seen on an ITX board for this generation, and is plenty to overclock our Intel Core i9-12900K or even the flagship i9-12900KS. Power flows from the required 8-pin EPS connector, on to a Renesas RAA229130 controller and then on to the 10 105A Renesas RAA22010540 SPS MOSFETs. The corresponding 1,050A available won’t hold your overclocking adventures back and is the same as supplied by the MSI Z690I Unify and Asus ROG Strix Z690I’s power deliveries.
Continuing right, we run into two reinforced DRAM slots with latching mechanisms on both sides. Gigabyte lists support for 64GB at speeds up to DDR4 6400(OC). The board ran both our kits (DDR5-5600 and DDR5-6000) without issue. Being an ITX board, we suspect there’s a lot more headroom available, but your mileage may vary depending on the memory kit and how good the CPU’s memory controller is.
Working our way down the right edge, we spy the 24-pin ATX connector to power the board, plus two SATA ports (supporting RAID0/1). The SATA port count will be low for some users, especially since the M.2 sockets only support PCIe-based M.2 modules, but as this is a board for compact systems, it should suffice for most people. Below are two USB headers: a Gen 2 (10 Gbps) Type-C and Gen 1 (5 Gbps) Type-A. Also in this area is a 4-pin RGB header for additional RGB lighting, while just below that is the front panel header.
Along the bottom edge is the full-length reinforced PCIe 4.0 x16 slot, and it indeed works at PCIe 4.0! The exposed audio codec (Realtek ALC4080) and a couple of Chemicon brand audio caps are to the left. The audio section here is solid, using a modern premium codec like most other Z690 ITX boards. Also in this area is the front-panel audio header (white).
Above the PCIe 4.0 slot is where you’ll find the other RGB header (3-pin), and a full-size 4-pin fan header. Mixed in this stack are the two M.2 sockets as well. Both M.2 sockets support up to 80mm PCIe/NVMe modules that run up to PCIe 4.0. You’ll have to look elsewhere if you need SATA support from these sockets.

The rear IO area sports a pre-installed IO plate matching the Aorus theme (black and gray). The black background gives way to Aorus branding and labels for the ports in a dark gray. While it’s nice these are labeled, the dark gray doesn’t contrast as much as white, so the legends are difficult to read, especially in low-light situations.
In total, there are eight USB ports: One USB 3.2 Gen 2×2 (20 Gbps) Type-C, three USB 3.2 Gen 2 (10 Gbps/red), two USB 3.2 Gen 1 (5 Gbps/blue) ports, and two USB 2.0 (480 Mbps/black) ports. Seven Type-A ports should be enough for most users–especially those building a compact PC. Video outputs for the iGPU consist of one HDMI (v2.1) and one DisplayPort (v1.4). You’ll also find the Intel-based 2.5 GbE port and the Wi-Fi 6E antenna connections here. To access the Q-Flash functionality (BIOS flashing without a CPU), there’s a tiny button between the Wi-Fi connections and the red USB ports. Last here is the audio stack, consisting of two analog plugs (line out and mic). I would like to see the full 5-plug plus SPDIF here, but it’s not a dealbreaker for most these days.

Test System Components

CPU Intel Core i9-12900K
Memory GSkill Trident Z DDR5-5600 CL36 (F5-5600U3636C16GX2-TZ5RK)
ADATA XPG Lancer DDR5-6000 CL40 (AX5U6000C4016G-DCLARBK)
GSkill Trident Z Neo DDR4-3600 (F4-3600C16Q-32GTZN)
GSkill Trident Z Royal DDR4-4000 (F4-4000C18Q-32GTRS)
GPU Asus TUF RTX 3070
Cooling Coolermaster MasterLiquid PL360 Flux
PSU EVGA Supernova 850W P6
Software Windows 11 64-bit (21H2, Build 22000.282)
Graphics Driver NVIDIA Driver 496.13
Sound Integrated HD audio
Network Integrated Networking (GbE or 2.5 GbE) 

Benchmark Settings

Synthetic Benchmarks and Settings
Procyon Version 2.0.249 64
Office Suite, Video Editing (Premiere Pro), Photo Editing (Photoshop, Lightroom Classic)
3DMark Version 2.20.7290 64
Firestrike Extreme and Time Spy Default Presets
Cinebench R23 Version RBBENCHMARK330542
Open GL Benchmark – Single and Multi-threaded
Blender Version 3.0.1
Full benchmark (all 3 tests)
Application Tests and Settings
LAME MP3 Version SSE2_2019
Mixed 271MB WAV to mp3: Command: -b 160 –nores (160Kb/s)
HandBrake CLI Version: 1.2.2
Sintel Open Movie Project: 4.19GB 4K mkv to x264 (light AVX) and x265 (heavy AVX)
Corona 1.4 Version 1.4
Custom benchmark
7-Zip Version 21.03-beta
Integrated benchmark (Command Line)
Game Tests and Settings
Far Cry 6 Ultra Preset – 1920 x 1080, HD Textures ON
F1 2021 Ultra Preset – 1920 x 1080, HBAO+, RT Med, TAA + 16xAF, Bahrain, FPS Counter ON  

Our standard benchmarks and power tests are performed using the CPU’s stock frequencies (including any default boost/turbo), with all power-saving features enabled. We set optimized defaults in the BIOS and the memory by enabling the XMP profile. For this baseline testing, the Windows power scheme is set to Balanced (default), so the PC idles appropriately.

To get the most out of the Intel Alder Lake chips, you need to be on Windows 11 with its updated scheduler. In most cases, Windows 10 performs well. However, some tests (Cinebench R20, Corona and POVRay) take a significant hit. In short, if you’re going with Alder Lake, you must upgrade to Windows 11 for the best results across the board. That may change with patching and updates in the future, though.


Leave a Reply

Your email address will not be published. Required fields are marked *